As owner of the new manufacturing facility building project, Thyme Manufacturing Co, Inc. has recently hired the project’s general contractor – Perkins Construction, Inc. In addition to developing the minimum insurance requirements to be used with Perkins Construction and its subcontractors, as Thyme’s newly appointed director of risk management, Jennifer is also responsible for arranging the insurance for the building during the course of its construction. This “course of construction” insurance is commonly known as builder’s risk insurance.
Thyme’s legal counsel has used the American Institute of Architects (AIA) construction contract documents with Perkins Construction – including the 2007 A201™ General Conditions of Construction.1 Of particular interest to Jennifer is Article 11.3 entitled “Property Insurance” – as this section will serve as Jennifer’s starting point to determine Thyme’sminimum builder’s risk insurance requirements.
Jennifer has been told to look for a “completed value” builder’s risk insurance policy, meaning the building limit should at least be equal to the full contract value of the project when completed, including the value of any changes or modifications to building. Jennifer learns that certain types of property not normally covered in a typical property insurance policy may be critical for builder’s risk insurance – such as coverage for temporary buildings & structures, temporary fencing, falsework2, the cost of excavation, site preparation, foundations and underground pipes. Jennifer also discovers that it is important in placing builder’s risk insurance to distinguish between new construction and the renovation of an existing building – builder’s risk insurance policies usually exclude coverage for an existing building that is being renovated.3 As the Thyme manufacturing facility is new construction, Jennifer does not have to be concerned with coverage for the renovation of existing buildings.
Other Coverage Extensions
Ordinance or Law
While At Temporary Storage Locations (materials and supplies that will become part of the building)
While in Transit (materials and supplies that will become part of the building)
In electing to purchase the builder’s risk insurance in accord with the AIA A201™-2007, Thyme has agreed to include coverage in the builder’s risk policy for not only their interest, but also the interests in the project of Perkins and any other contractor, subcontractor or sub-subcontractor. Unless others object, Thyme is authorized to settle a claim with the builder’s risk insurer, but holds the proceeds as a fiduciary for other insured interests. Further, Jennifer notices that Thyme is required to continue the builder’s risk insurance in effect until final payments have been made or Thyme is the only person or organization with an interest in the project – whichever is later. The time period for which Thyme has agreed to maintain the builder’s risk in force will influence the selected policy period – particularly if the project is expected to take over one year. Jennifer’s research has revealed that obtaining a builder’s risk policy from a new insurer on a building that is partially completed is very difficult – if available at all – and thus the strong preference to continue the same builder’s risk policy until the project is finished.
Deductibles and Subrogation
Thyme is considering a larger deductible – $25,000 – to keep premium costs down. This raises a question – if the loss is caused by the negligence of Perkins or a subcontractor, can Thyme charge the deductible to that responsible party? After a conference with Thyme’s legal counsel, Jennifer learns that Thyme cannot recover such costs because Thyme has agreed to the AIA A201™-2007 conditions – which clearly state Thyme is responsible for any loss within the builder’s risk deductible. In fact, Thyme’s legal counsel points out to Jennifer that Thyme has waived its rights against Perkins and any of their subcontractors or sub-subcontractors to the extent that the builder’s risk policy (or other property insurance) provides coverage for the damage. Further, Perkins and its subcontractors and sub-subcontractors also waive any rights they may have to recover from Thyme – again, to the extent the damage caused is covered by insurance. The implications of the waiver clause are clear to Jennifer– the builder’s risk policy she purchases must allow Thyme to waive its rights against all other interests covered by this policy – including damage to the project that is not the work of a subcontractor or sub-subcontractor.4
Occupancy or Use
As might be expected, Thyme’s owner, Justin, is very eager to get the project finished and is already asking Perkins when he can move into the new facility and start manufacturing. Apparently this may be a problem – Jennifer learns that a builder’s risk policy may cease providing coverage if Thyme begins to occupy the new facility. However, after some inquiry, she finds that insurers will generally grant permission to occupy. After a discussion between Jennifer and Justin about this matter, Justin agrees to give Jennifer as much notice as possible before he begins occupying the new facility – giving Jennifer time to seek permission from the insurer for occupancy and avoid losing coverage under the builder’s risk policy.
Loss of Use
An area that is not at all clear to Jennifer is the section of the AIA A201™-2007 contract that is entitled “Loss of Use Insurance.” While Jennifer understands that Thyme has waived all of its rights of action against Perkins for loss of use of the facility due to “fire or other hazards, however caused” and also knows the purchase of this insurance is at the option of Thyme, she does not know what is meant by “loss of use insurance.”
Delay in Completion/Soft Costs
If an insured cause of loss damages Thyme’s facility and that damage results in a delay in the project completion, Thyme could suffer two types of consequential loss:
Loss of Income. Thyme is building the new facility as it anticipates expanding its manufacturing to develop increased revenues of 30% in the first year alone. If a fire were to delay the facility’s opening by one year, then Thyme would suffer a net income loss resulting from its failure to realize the 30% revenue increase. Coverage may be arranged on the builder’s risk policy for Business Income coverage that would respond to the loss of net income that would have been earned for the period of the delay.
Soft Costs. In addition to being exposed to the loss of income that may result from a delay in the completion of its new manufacturing facility, Thyme is also exposed toadditional costs that are unique to a construction project. For example, the delay in completion may require Thyme to pay interest for a longer period on its construction loan – in lieu of its planned permanent financing with lower interest costs. In fact, the permanent financing may be lost entirely, requiring additional accounting and legal costs to renegotiate the permanent financing. Project administration costs, such as security, may continue beyond what was budgeted. Design fees may be greater because of the delay. The additional insurance costs incurred by Thyme during the period of construction (including the incremental additional costs of the builder’s risk insurance) may continue longer than expected because of the delay. Depending on the type of project, other soft costs may be incurred, including advertising or marketing expenses that must again be incurred if the project was to be sold; similarly, additional legal or accounting costs may be incurred to renegotiate leases if the project was to be leased to others. Insurance for soft costs usually specifically lists and describes each additional expense covered as soft costs – it is important to closely examine the soft cost coverage and compare what is offered to what additional costs an organization similar such Thyme may incur if the project is delayed due to damage caused by an insured cause of loss.
Jennifer has a strong understanding of the general contours of Thyme’s builder’s risk insurance needs, including its obligations under its construction contract with Perkins. However, she has a great deal of work left to do – starting with choosing a building limit, including sub-limits for certain coverages and coverage extensions, as well as whether and how much loss of income and soft cost coverage (including the categories of soft costs coverage) to purchase. In addition, upon review of builder’s risk proposals, it is important for Jennifer to review the policy forms being offered to make sure she has the coverage she wants or needs, including but not limited to the causes of loss, whether all interests are insured and whether Thyme’s waiver of it rights against the others is allowed in the policy. Finally, Jennifer needs to explore limitations in the builder’s risk policy as respects occupancy by Thyme – will the insurer permit occupancy – if so, when and under what conditions.
2 Falsework is defined as the temporary structure erected to support work in the process of construction. Source: dictionaryofconstruction.com
3 Coverage for an existing building undergoing renovation can usually be arranged, often with a separate limit from the value of the renovations and often on an actual cash value basis.
This article was originally published by AmWINS Group, Inc., a leading wholesale distributor of specialty insurance products and services. AmWINS publishes The Edge, a monthly email with informative and timely articles for P&C and benefits insurance agents and brokers. To sign up to receive The Edge or for more information about AmWINS, visit amwins.com.
Legal Disclaimer: Views expressed here do not constitute legal advice. The information contained herein is for general guidance of matter only and not for the purpose of providing legal advice. Discussion of insurance policy language is descriptive only. Every policy has different policy language. Coverage afforded under any insurance policy issued is subject to individual policy terms and conditions. Please refer to your policy for the actual language.